Ricoh MPC 2800 AT-C2 User Manual

13. Card Save should be displayed in the top left of the display panel.
14. Send a job to the printer. The Communicating light should start blinking as shown below.
15. As soon as the printer receives the data, it will be stored on the SD card automatically with no print
output. Nothing is displayed on the screen, indicating that a Card Save operation was successful.
16. Press “Offline” and then the “Clear/Stop” button to exit Card Save mode.
Card Save Function
343
5

Ricoh MPC 2800 AT-C2 Specifications

General

Brand	Ricoh
Model	MPC 2800 AT-C2
Category	All in One Printer
Language	English