005 Bit Switch 5 0 1
bit 0
Show "Collate Type", "Staple Type" and "Punch
Type" buttons on the operation panel.
Disable Enable
If enabled, users will be able to configure a Collate Type, Staple Type, and Punch Type
from the operation panel. The available types will depend on the device and configured
options.
After enabling the function, the settings will appear under:
"User Tools > Printer Features > System"
bit 1 DFU - -
bit 2 DFU - -
bit 3 [PS] PS Criteria Pattern3 Pattern1
Change the number of PS criterion used by the PS interpreter to determine whether a
job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
bit 4 Increase max number of the stored jobs to 1000
jobs.
Disable
(100)
Enable (1000)
Enable: Changes the maximum number of jobs that can be stored on the HDD via Job
Type settings to 1000. The default is 100.
bit 5 Face-up output Disable Enable
Enable: All print jobs will be output face-up in the destination tray.
bit 6 DFU - -
bit 7 DFU - -
1001 Bit Switch
006 Bit Switch 6 DFU - -
1001 Bit Switch
007 Bit Switch 7 DFU - -
8. Appendix: SP Mode Tables
492
To Next Page
Loading...
Need help?
General
