Instrument Function
R&S
®
SMBV100A
301Operating Manual 1407.6062.32 ─ 08
SCPI command:
[:SOURce<hw>]:BB:DM:AQPSk:ANGLe on page 566
More - Modulation Type - Digital Modulation
Calls the submenu which displays the mapping of the currently selected modulation type
and the digital modulation delay in the case of an external data source.
The "Modulation - CW Switching" section can be used to enable switching of the signal
between modulated and unmodulated.
In case of selection "Variable FSK", the FSK type and the deviation for each symbols is
set in the "Variable FSK" section.
Baseband Signal - Baseband Block
To Next Page
Loading...
