Rohde & Schwarz SMBV100A - Page 583

Remote Control Commands
R&S
®
SMBV100A
566Operating Manual 1407.6062.32 ─ 08
Parameters:
<Type> RCOSine | COSine | GAUSs | LGAuss | CONE | COF705 |
COEQualizer | COFequalizer | C2K3x | APCO25 | SPHase |
RECTangle | USER | PGAuss | LPASs | DIRac | ENPShape |
EWPShape | LTEFilter | LPASSEVM | APCO25Hcpm |
APCO25Lsm
*RST: GAUSs
Example:
BB:DM:FILT:TYPE COS
selects the Cosine filter type.
Modulation Settings
[:SOURce<hw>]:BB:DM:AQPSk:ANGLe...........................................................................566
[:SOURce<hw>]:BB:DM:ASK:DEPTh...............................................................................566
[:SOURce<hw>]:BB:DM:CODing.....................................................................................567
[:SOURce<hw>]:BB:DM:FORMat.....................................................................................567
[:SOURce<hw>]:BB:DM:FSK:DEViation...........................................................................568
[:SOURce<hw>]:BB:DM:FSK:VARiable:SYMBol<ch>:DEViation.........................................568
[:SOURce<hw>]:BB:DM:FSK:VARiable:TYPE...................................................................568
[:SOURce<hw>]:BB:DM:MDELay....................................................................................569
[:SOURce<hw>]:BB:DM:AQPSk:ANGLe <Angle>
For AQPSK modulation, sets the angle alpha between the point (0,0) and the I axis.
Parameters:
<Angle> float
Range: 0 to 180
Increment: 0.01
*RST: 0
Default unit: Deg
Example:
BB:DM:FORM AQPS
selects modulation type AQPSK.
BB:DM:AQPS:ANGL 45
[:SOURce<hw>]:BB:DM:ASK:DEPTh <Depth>
The command sets the ASK modulation depth when modulation type ASK is selected.
Parameters:
<Depth> float
Range: 0 to 100
Increment: 0.1PCT
*RST: 100
Default unit: PCT
SOURce Subsystem