Instrument Function
R&S
®
SMBV100A
304Operating Manual 1407.6062.32 ─ 08
More - Filter - Digital Modulation
Calls the menu for displaying the filter characteristic of the currently selected filter.
Load User Filter- Filter - Digital Modulation
Calls the menu "Select List File User Filter" for selecting a user-defined filter file with
extansion *.vaf (see "User filter" on page 292). The button is only available if filter type
"USER" is selected.
The button "File" "Manager" calls the "File" "Manager" menu. The "File" "Manager" menu
is used to display and delete files.
SCPI command:
[:SOURce<hw>]:BB:DM:FLISt:SELect on page 579
[:SOURce<hw>]:BB:DM:FLISt:CATalog on page 573
[:SOURce<hw>]:BB:DM:FLISt:DELete on page 579
Current Filter Response
Displays the filter characteristic of the currently selected filter.
SCPI command:
n.a.
Power Ramp
The lower part of the Custom Digital Modulation menu is used for setting triggers, marker
and clocks, as well as for power ramp settings.
Power Ramp Control - Digital Modulation
Calls the power ramp control menu (see "Power Ramp Control" on page 312).
SCPI command:
n.a.
Trigger/Marker - Digital Modulation
Calls the "Trigger/Marker/Clock" dialog, used to select the trigger source, set the time
delay on an external trigger signal and configure the marker output signals.
See "Trigger/Marker/Clock" on page 315.
SCPI command:
n.a.
Baseband Signal - Baseband Block
To Next Page
Loading...
