Instrument Function
R&S
®
SMBV100A
305Operating Manual 1407.6062.32 ─ 08
Execute Trigger - Digital Modulation
Executes trigger manually. A manual trigger can be executed only when an internal trig-
ger source and a trigger mode other than Auto have been selected.
SCPI command:
[:SOURce<hw>]:BB:DM:TRIGger:EXECute on page 555
Clock - Digital Modulation
Calls the "Trigger/Marker/Clock" menu. The "Trigger/Marker/Clock" menu is used to
select the clock source (see "Clock Settings" on page 321).
SCPI command:
n.a.
List Management
The "List Management" menu is called from the "Custom Digital Modulation" main menu.
The data and control lists are selected and created in the "File Select" menu which is
called up by means of the "Data List..." and "Control List..." buttons.
The "File Manager" is used to copy, rename and delete files and to create directories.
For more information, see chapter 4.7, "File Management", on page 91.
To ensure that the selected data or control list is used for generating the digital signal,
the list must be selected as the data source:
Data Parameter Selection
Digital data "Source" DList
Marker "Marker Mode" CList
Control signals
CW, Level Attenuation and Burst
Gate
"Source" Internal
Baseband Signal - Baseband Block
To Next Page
Loading...
