Instrument Function
R&S
®
SMBV100A
306Operating Manual 1407.6062.32 ─ 08
The data editor is called using the "Edit Data List..." and "Edit Control List ..." buttons.
The contents of the selected list are displayed.
Operating the list editors is described in chapter 4.5.1, "Working with List Edi-
tor", on page 84.
Select Data/Control List - Digital Modulation
Selects data/control list. This opens the "File Select" window in which the data/control list
can be selected.
SCPI command:
[:SOURce<hw>]:BB:DM:DLISt:SELect on page 578
[:SOURce<hw>]:BB:DM:CLISt:SELect on page 576
Create Data/Control List - Digital Modulation
Creates new data/control list. This opens the "File Select" window in which the data/
control list can be created.
The file name has to be entered in field "File Name:". The new list contains no data, it
can be edited in the list editor.
SCPI command:
[:SOURce<hw>]:BB:DM:DLISt:SELect on page 578
[:SOURce<hw>]:BB:DM:CLISt:SELect on page 576
File Manager - Digital Modulation
Calls the "File Manager".
The "File Manager" is used to copy, delete and rename files and to create new directories.
For detailed description, see chapter 4.7.2, "File Manager", on page 94.
SCPI command:
[:SOURce<hw>]:BB:DM:DLISt:SELect on page 578
[:SOURce<hw>]:BB:DM:DLISt:COPY on page 574
[:SOURce<hw>]:BB:DM:DLISt:DELete on page 578
[:SOURce<hw>]:BB:DM:CLISt:SELect on page 576
[:SOURce<hw>]:BB:DM:CLISt:COPY on page 574
[:SOURce<hw>]:BB:DM:CLISt:DELete on page 576
Data List Editor
The "Data List Editor" for editing the selected data list is called up in the "List Manage-
ment" submenu of the "Custom Digital Modulation" main menu by means of the "Edit
Data List..." button.
See chapter 4.5, "Editors", on page 83 for description on how to use the editor.
Baseband Signal - Baseband Block
To Next Page
Loading...
