Instrument Function
R&S
®
SMBV100A
327Operating Manual 1407.6062.32 ─ 08
ARB MOD Main Menu
The upper part of the menu is used for powering up, selecting and configuring ARB mod-
ulation.
The lower part of the menu is used for setting triggers and clocks, as well as for file
management. Test signals can be output for test purposes.
Multi Segment Waveform Options
The section "Multi Segment Waveform Options" of the menu is only displayed if a multi
segment waveform is loaded.
The section comprises the settings necessary to adjust the trigger for the switch between
the segments of a multi segment waveform. The parameters displayed depend on the
selected trigger source.
The parameters in this sections are identical with the parameters in the section "Next
Segment Trigger In" in the "Trigger/Marker" dialog; for detailed information see "Next
Segment Trigger In" on page 336.
State (ARB)
Enables/disables ARB modulation.
Baseband Signal - Baseband Block
To Next Page
Loading...
