Instrument Function
R&S
®
SMBV100A
354Operating Manual 1407.6062.32 ─ 08
Before a multi segment configuration file can be saved, a file name must be entered in
"Output File", since this is saved with the configuration file for internal purposes.
SCPI command:
The configuration file to be used for the creation of the multi segment waveform is defined
with the command:
[:SOURce<hw>]:BB:ARB:WSEGment:CREate
or [:SOURce<hw>]:BB:ARB:WSEGment:CLOad
The file name of the waveform file is always determined with the command [:
SOURce<hw>]:BB:ARB:WSEGment:CONFigure:OFILe
Load List
Opens the file menu to select the configuration file to be edited.
SCPI command:
[:SOURce<hw>]:BB:ARB:WSEGment:CONFigure:CATalog on page 541
[:SOURce<hw>]:BB:ARB:WSEGment:CONFigure:SELect on page 545
New List
Calls the "Create Multi Segment Waveform List" dialog to enter the name of the new file.
A new new configuration table is created.
SCPI command:
[:SOURce<hw>]:BB:ARB:WSEGment:CONFigure:SELect on page 545
Define Sequencing List
Open a dialog box for configuring of the play lists (see "Multi Segment Waveform
Sequencing" on page 355).
SCPI command:
n.a.
Create
Creates a new multi segment waveform using the current table entries.
This multi segment waveform is saved with the file name specified in "Output File". As
with normal waveforms, the file extension is "*.wv".
Depending on the configuration of the multi segment waveform, calculation may take
some time. A panel with a progress bar and an "Abort" button appears during creating of
the multi segment waveform.
In remote control the configuration file to be used for the creation of the multi segment
waveform is defined with the command:[:SOURce<hw>]:BB:ARB:WSEGment:
CREate or [:SOURce<hw>]:BB:ARB:WSEGment:CLOad.
The file name of the waveform file is always determined with the command [:
SOURce<hw>]:BB:ARB:WSEGment:CONFigure:OFILe
SCPI command:
[:SOURce<hw>]:BB:ARB:WSEGment:CREate on page 546
Create and Load
Creates a new multi segment waveform using the current table entries.
Baseband Signal - Baseband Block
To Next Page
Loading...
