Instrument Function
R&S
®
SMBV100A
357Operating Manual 1407.6062.32 ─ 08
Next ← Sequencing Play List
Determines the action after completing the current one, like for instance which segment
is processed after the processing of the current one is finished.
"Next Id#"
The next active segment in the play list is processed.
"Blank"
After the processing of the current segment is completed, the signal
output is stopped until a signal restart like a retrigger signal is received.
A restart signal causes a complete restart of the sequencing play list.
"Endless"
The current segment is re-played until a signal restart like a retrigger
signal is received and the complete sequencing play list is restarted.
Only active segments are considered.
"Goto Id#"
Determines the row number of the segment to be processed next.
This feature is currently limited for the first 32 rows.
SCPI command:
n.a.
Info ← Sequencing Play List
Opens a dialog with detailed information about the currently selected waveform.
See also "Waveform Info" on page 329.
SCPI command:
n.a.
Append
Inserts a new row at the end of the sequencing play list table.
SCPI command:
[:SOURce<hw>]:BB:ARB:WSEGment:SEQuence:SELect on page 548
[:SOURce<hw>]:BB:ARB:WSEGment:SEQuence:APPend on page 548
Delete
Deletes the selected row.
SCPI command:
n.a.
Shift Id# Up/Down
Shifts the selected row up and down.
SCPI command:
n.a.
Sequencing Graphic
Displays the play list graph according to the current configuration.
The graph shows the segment sequence, the segment number and the number of times,
the segment is repeated; considered are only the active segments.
SCPI command:
n.a.
Baseband Signal - Baseband Block
To Next Page
Loading...
