Remote Control Basics
R&S
®
SMBV100A
404Operating Manual 1407.6062.32 ─ 08
6. Enter the IP address or the host name of the R&S SMBV and select "Next".
7. Enter the alias name if required.
The alias name must not be mistaken for the computer name. It is only used for
instrument identification within the program and displayed in the menu as an option
in case of an Ethernet link.
8. Confirm the settings with "Finish".
The instrument is configured and the settings are displayed in the "TCP/IP Set-
tings" tab.
9. To test the connection, select "Validate".
A message indicates whether the link to the instrument can be set up or not.
Starting a Remote Control Session
To Next Page
Loading...
