Remote Control Commands
R&S
®
SMBV100A
532Operating Manual 1407.6062.32 ─ 08
[:SOURce<hw>]:BB:ARB:MCARrier:EDIT:CARRier:STATe <State>
The command switches all the carriers in the selected carrier range on or off.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: 1
Example:
BB:ARB:MCAR:EDIT:CARR:STAT ON
sets all the carriers in the carrier range to ON.
[:
SOURce<hw>]:BB:ARB:MCARrier:OFILe <OFile>
This command defines the output file name for the multi carrier waveform. This file name
is used when a waveform is calculated (command SOUR:BB:ARB:MCAR:CLOad or
SOUR:BB:ARB:MCAR:CREate). The file extension is *.wv.
Parameters:
<OFile> string
Example:
MMEM:CDIR '/var/smbv/user/waveform'
sets the default directory to /var/smbv/user/waveform.
BB:ARB:MCAR:OFIL 'mcar1_2'
defines the file name mcar1_2.wv for the multi carrier waveform
file
[:SOURce<hw>]:BB:ARB:MCARrier:PRESet
The command sets all ARB multi carrier parameters to their default values.
Example:
BB:ARB:MCAR:PRES
resets the ARB multi carrier parameters to default values.
Usage: Event
[:SOURce<hw>]:BB:ARB:MCARrier:SAMPles?
The command queries the resulting file size. The file size is returned in samples.
Return values:
<Samples> integer
Range: 0 to INT_MAX
Increment: 1
*RST: 0
Example:
BB:ARB:MCAR:SAMP?
queries the file size of the currently calculated multi carrier wave-
form.
Usage: Query only
SOURce Subsystem
To Next Page
Loading...
