Remote Control Commands
R&S
®
SMBV100A
583Operating Manual 1407.6062.32 ─ 08
Example:
MMEM:CDIR '/var/smbv/user/dig_mod'
sets the default directory.
BB:DM:STAN:ULIS:CAT?
reads out all the files with Digital Standard settings in the default
directory.
Response: 'DM_QAM'
the file DM_QAM with Digital Standard settings is available.
Usage: Query only
[:SOURce<hw>]:BB:DM:STANdard:ULISt:DELete <Filename>
This command deletes the selected file with Digital Standard settings. The directory is
set using command MMEM:CDIRectory. A path can also be specified, in which case the
files in the specified directory are read. The file extension may be omitted. Only files with
the file extension *.dm_stu will be deleted.
Setting parameters:
<Filename> string
Example:
BB:DM:STAN:ULIS:DEL 'DM_QAM'
deletes file 'DM_QAM'.
Usage: Setting only
[:SOURce<hw>]:BB:DM:STANdard:ULISt:LOAD <Filename>
This command loads the selected file with Digital Standard settings. The directory is set
using command MMEM:CDIRectory. A path can also be specified, in which case the
files in the specified directory are read. The file extension may be omitted. Only files with
the file extension *.dm_stu will be loaded.
Setting parameters:
<Filename> string
Example:
BB:DM:STAN:ULIS:LOAD 'DM_QAM'
loads file 'DM_QAM'.
Usage: Setting only
[:SOURce<hw>]:BB:DM:STANdard:ULISt:STORe <Filename>
This command stores the current Digital Standard settings into the selected file. The
directory is set using command MMEM:CDIRectory. A path can also be specified, in
which case the files in the specified directory are read. Only the file name has to be
entered. User Standards are stored as files with the specific file extensions *.dm_stu.
Setting parameters:
<Filename> string
Example:
BB:DM:STAN:ULIS:STOR 'DM_QAM'
stores the current Digital Standard settings into file 'DM_QAM'.
SOURce Subsystem
To Next Page
Loading...
