10.29
Date Code 20060320 Instruction Manual SEL-311C Relay
Serial Port Communications and Commands
Command Explanations
=>SHO T <Enter>
Text Labels:
NLB1 = CLB1 = SLB1 = PLB1 =
NLB2 = CLB2 = SLB2 = PLB2 =
NLB3 = CLB3 = SLB3 = PLB3 =
NLB4 = CLB4 = SLB4 = PLB4 =
NLB5 = CLB5 = SLB5 = PLB5 =
NLB6 = CLB6 = SLB6 = PLB6 =
NLB7 = CLB7 = SLB7 = PLB7 =
NLB8 = CLB8 = SLB8 = PLB8 =
NLB9 = CLB9 = SLB9 = PLB9 =
NLB10 = CLB10 = SLB10 = PLB10 =
NLB11 = CLB11 = SLB11 = PLB11 =
NLB12 = CLB12 = SLB12 = PLB12 =
NLB13 = CLB13 = SLB13 = PLB13 =
NLB14 = CLB14 = SLB14 = PLB14 =
NLB15 = CLB15 = SLB15 = PLB15 =
NLB16 = CLB16 = SLB16 = PLB16 =
DP1_1 =BREAKER CLOSED DP1_0 =BREAKER OPEN
Press RETURN to continue
DP2_1 = DP2_0 =
DP3_1 = DP3_0 =
DP4_1 = DP4_0 =
DP5_1 = DP5_0 =
DP6_1 = DP6_0 =
DP7_1 = DP7_0 =
DP8_1 = DP8_0 =
DP9_1 = DP9_0 =
DP10_1= DP10_0=
DP11_1= DP11_0=
DP12_1= DP12_0=
DP13_1= DP13_0=
DP14_1= DP14_0=
DP15_1= DP15_0=
DP16_1= DP16_0=
79LL = 79SL =
=>
STA Command (Relay Self-Test Status)
The STA command displays the status report, showing the relay self-test
information.
To view a status report, enter the command:
=>STA n <Enter>
where n is an optional parameter to specify the number of times (1–32767) to
repeat the status display. If n is not specified, the status report is displayed
once. The output of an SEL-311C with wye-connected voltage inputs and no
extra I/O board is shown:
To Next Page
