EasyManua.ls Logo

Siemens HiPath 3000 Series - Page 1055

Siemens HiPath 3000 Series
1302 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
service.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
12-81
Nur für den internen Gebrauch Service
Guided Maintenance
21-008 !Clock OFF ISDN clock lost. Check that the clock is
available on the S
0
/S
2M
line.
If necessary, use HiPath
3000/5000 Manager E to
correct the clock’s allowed/
denied numbers list (Trunk
– Clock parameters).
If necessary, perform a
hard restart (reset).
21-011 !Fan Alarm ON Fan error. Check the fan and air sup-
ply in the 19” housing.
Note the ambient tempera-
ture.
21-012 !Fan Alarm OFF The fan error has
been corrected.
None
21-013 !no ack from
temp. sensor
No response from
temperature sen-
sor.
21-014 !overload at code
receiver
Not enough DTMF
receivers.
Use a larger system.
21-015 !overload at code
transmit.
Not enough DTMF
transmitters.
Use a larger system.
21-019 !Shorten Msg not
successful
Internal error: An
overlong ISDN
message could not
be shortened by
deleting Facility
IEs.
Set up a trace using infor-
mation from BLS.
Create a stack dump.
Save a snapshot.
21-028 !Power Alarm on Emergency battery
operation due to
power outage.
Check line voltage.
Note battery capacity.
21-029 !Power Alarm off Power supply re-
stored.
None
Table 12-7 HiPath 3000 Class B Error Messages
No. HiPath 3000/
5000 Manager E:
Event Log Entry
Meaning Required Measures Note

Table of Contents

Related product manuals