Workpoint Clients Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
10-124 HiPath 3000/5000 V9, Service documentation
wclient.fm
Attendant Console Versions
10.12.2 optiPoint Attendant
A specially equipped optiPoint telephone can perform switching services for HiPath 3000/5000.
This optiPoint Attendant simultaneously serves as the intercept position. It is the destination for
all incoming non-DID calls and calls which the call-allocation algorithms are unable to route to
users (intercept calls). The attendant routes these calls to the correct destination.
Configuration as optiPoint Attendant is possible for the following terminals: optiPoint 500 econ-
omy/basic/standard/advance, optiPoint 410 economy/economy plus/standard/advance, opti-
Point 420 economy/economy plus/standard/advance, and optiPoint 600 office.
Standard key assignment (default) for optiPoint Attendant
For more information, please refer to the optiPoint Attendant operating instructions.
Figure 10-58 optiPoint 500 standard: Standard Key Layout optiPoint Attendant
Service Night service
Redial Internal phonebook
Microphone on/off Queued calls
Loudspeaker Override
Hold
External 1
External 2
Disconnect
To Next Page
Loading...
