Workpoint Clients Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
10-4 HiPath 3000/5000 V9, Service documentation
wclient.fm
OpenStage Product Family
10.1 OpenStage Product Family
Connection variants
The following connection variants are available for selection for the terminals in HiPath 3000/
5000:
● TDM connection
● CorNet-IP connection (also as gigabit version, Page 10-5)
Product family
The following terminals belong to the OpenStage product family for HiPath 3000/5000:
● OpenStage TDM: 10 T, 15 T, 20 T, 30 T, 40 T, 60 T, 80 T
● OpenStage CorNet IP (HFA): 15, 20 E, 20, 20 G, 40, 40 G, 60, 60 G and 80, 80 G
Control elements
The following elements and the display guarantee convenient and interactive operation.
● 3-way navigator: in OpenStage 20.
● Programmable keys: in OpenStage 30. The function is displayed to the left of the keys on
a paper label.
● Programmable touch/sensor keys next to the display (illuminated) and a 5-way navigator:
in OpenStage 40. The function is displayed to the left of the keys on the display.
● Programmable touch/sensor keys next to the display (illuminated) and a TouchGuide: in
OpenStage 60, OpenStage 80. The function is displayed to the left of the keys on the dis-
play.
Programmable keys can be used as function keys, speed dialing keys or trunk keys.
The number of available programmable keys can be increased by adding:
● OpenStage Key Module 15: in OpenStage 15, OpenStage 30
● OpenStage Key Module: in OpenStage 40, OpenStage 60, OpenStage 80
● OpenStage BLF: in OpenStage 30, OpenStage 40
To Next Page
Loading...
