Siemens HiPath 3000 Series - Network-Wide Features with IP Networking

h3h5_in_the_lan.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
13-57
Nur für den internen Gebrauch HiPath 3000/5000 in the LAN Network
IP Trunking
13.7.3 Network-Wide Features with IP Networking
New features have been added to the functionality of networking over digital leased lines via
CorNet-N.
Table 13-5 Network-wide features with IP networking
Function Name Description of the Function
Network-wide features
using CorNet-N/IP Net-
working
● Connection setup
● Direct inward dialing in the network
● Different rings (internal/external)
● Transmission of number and name
● Number or name shown on display
● Callback on busy/free
● Advice of charges output at subscriber line (AOC-D)
● Call forwarding—no answer
● Call forwarding
(rerouting for optimization of B channel use.)
● Message waiting indicator for callbacks and voicemail mes-
sages
● Call waiting
● Network-wide class-of-service (max. 4 classes of service)
Additional system servic-
es
● Network-wide shared numbering plan
● Display of name and number suppressed
● Consultation hold (over second B channel)
● Transfer (over second B channel with release of tie trunk when
station transferred)
● Conference with max. five participants
(no network-wide display function)
● Toggle
● Hunt group and group call across all nodes)
● Directed joining and leaving a group,
cross-nodal
● Hunt group overflow
● Call detail recording for all nodes
(communication platforms) in the network (central solution)