Siemens HiPath 3000 Series - Community (ReadWrite

Notes for Editing the File snmpd.cnf Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
E-4 HiPath 3000/5000 V9, Service documentation
snmpd.fm
Community (Read/Write)
E.3 Community (Read/Write)
snmpCommunityEntry <snmpCommunityIndex> <snmpCommunityName> <snmpCom-
munitySecurityName> <snmpCommunityContextEngineID> <snmpCommunityCon-
textName> <snmpCommunityTransportTag> <snmpCommunityStorageType>
● snmpCommunityIndex
Any unambiguous identifier for the entry.
String with 1-32 characters.
● snmpCommunityName
The incoming snmpv1 community (read or write community).
● snmpCommunitySecurityName
This identifier represents the entry within the entire configuration file (for example, in the
snmpTargetParamsSecurityName).
Always “public” (read community and trap destinations) or “private” (write community).
● snmpCommunityContextEngineID
The value is always “localSnmpID”.
● snmpCommunityContextName
Is always empty.
● snmpCommunityTransportTag
Is always empty.
● snmpCommunityStorageType
Always “nonVolatile” (persistent storage necessary).