Siemens HiPath 3000 Series - Manual Customer Data Backup with Hipath 3000

service.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
12-19
Nur für den internen Gebrauch Service
Service and Maintenance Tasks
12.3.1.1.2 Manual Customer Data Backup with HiPath 3000
You can perform a manual CDB backup using HiPath 3000/5000 Manager E (in online mode)
or Assistant T.
However, be aware that it is not possible to deliberately abort a manual backup that is initiated
using Assistant T. Once the CDB backup process starts, it should be ended because the back-
up continues to run in the background.
You can also manually initiate a CDB restore, including the call detail data, from the MMC.
Procedure: Manual CDB backup, system restore using Assistant T
Step Activity
Manual customer data backup on the MMC
1. Assistant T: Start system administration
2. Menu 28 -> Edit CDB
3. Menu 28-2 -> Back up CDB data
4. Menu 28-2-1 -> CDB on MMC
Loading the saved customer data from the MMC into the system
1. Assistant T: Start system administration
2. Menu 28 -> Edit CDB
3. Menu 28-2 -> Back up CDB data
4. Menu 28-2-2 -> CDB from MMC
Warning: When performing this action, the system performs a hard restart.