Siemens HiPath 3000 Series - Optipoint Accessories; External AC Adapters; Local Power Supply for Optipoint 500, Optipoint 600 Office

wclient.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
10-109
Nur für den internen Gebrauch Workpoint Clients
optiPoint Accessories
10.8 optiPoint Accessories
The following data is valid for the telephone families optiPoint 410, optiPoint 410 S, optiPoint
420, optiPoint 420 S, optiPoint 500, and for the optiPoint 600 office telephone. Restrictions are
indicated in the relevant places.
10.8.1 External AC Adapters
You may need an external AC adapter if you are using large configurations or if you need to
extend the range.
10.8.1.1 Local Power Supply for optiPoint 500, optiPoint 600 office
You can connect a local power supply to the line cords of a host or client telephone using two
RJ11 jacks and the connection cable supplied (see Figure 10-53).
Variants
● Local power supply, Euro: AUL:06D1284 (C39280-Z4-C71 = number entered on unit)
● Local power supply, UK: AUL:06D1287 (C39280-Z4-C72 = number entered on unit)
● Local power supply, 110 V USA: AUL:51A4827 (C39280-Z4-C73 = number entered on
unit)
Technical data for local power supply AUL:06D1284 (Euro)
● Line voltage: 220 (230) VAC
● AC line frequency: 47 ... 53 Hz
● Output voltage: max. 50 VDC, min. 30 VDC
● Output current: Max. 250 mA