Siemens HiPath 3000 Series - Connecting Workpoint Clients; Making Trunk and Networking Connections

Installing HiPath 3000 Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
4-82 HiPath 3000/5000 V9, Service documentation
inst_h3.fm
Installing HiPath 3800
4.1.9 Connecting Workpoint Clients
Refer to Chapter 10 for details.
4.1.10 Making Trunk and Networking Connections
Refer to the following board descriptions for information:
● DIUN2 (S
2M
)
● DIUT2 (S
2M
, T1)
● STMD3 (S
0
)
● STMI2 (IP)
● TM2LP (MSI)
● TMEW2 (E&M)
● DIU2U (for U.S. only)
● TMC16 (for selected countries only)
● TMDID (for U.S. only)