Siemens HiPath 3000 Series - System-Specific Capacity Limits for Hipath 3000, Hipath 5000

sysdat.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
2-43
Nur für den internen Gebrauch System Data
System-Specific Capacity Limits for HiPath 3000, HiPath 5000
2.3 System-Specific Capacity Limits for HiPath 3000, HiPath 5000
The maximum capacity limits are calculated based on the following assumptions:
● HiPath 3800: two board slots are reserved for trunks.
● HiPath 3550, HiPath 3500: Two S
0
interfaces on the central board + 1 board slot are re-
served for trunks.
● HiPath 3350, HiPath 3300: Two S
0
interfaces on the central board are reserved for trunks.
● Traffic capacity: 0.15 erlangs
Alternative capacity limits may be determined for sales purposes.
Table 10-9 contains the maximum system-specific configurations for U
P0/E
workpoint clients
and the corresponding add-on modules and adapters. Refer to the section “Capacities” in the
system description for a more detailed data table.
Table 2-26 HiPath 3000/5000 - System-Specific Capacity Limits (Maximum Configuration)
System HiPath
3800
1
HiPath
3550
HiPath
3500
HiPath
3350
HiPath
3300
HiPath
Com-
Scendo
Service
Stations/Workpoint Clients
Total Number of TDM and IP Stations
2
500 96
3
96
4
96
5
96
6
–
IP stations (system clients) 500 96
7
96
7
96
7 8
96
7 9
1000
Total number of TDM stations
2
384 96
10
77
10 11
57
12
41
13
–
TDM Stations
Analog stations 384 96
2
44
14
36
15
20
16
–
U
P0/E
stations 384 72
17
48
18
24
19
24
20
–
Additional stations via adapter (phone
adapter/analog adapter/ISDN adapter)
116 48
10
29
10
24
21
24
21
–
Cordless stations 250 64/32
22 23
32 16 16 –
Base Stations forHiPath Cordless Office 64 16/7 7 3 3 –
Lines
Total Number of Lines 250 60 60 16 16 –
Total number of analog trunks and network
trunks
120 60 60 16 8 –
Total number of B channels on digital trunks
and digital network trunks (S
0
, S
2M
)
180 60 60 16 16 –
CorNet IP network trunks 128 60 60 16 16 250