Service Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
12-110 HiPath 3000/5000 V9, Service documentation
service.fm
Security Features
12.7 Security Features
12.7.1 Access Security
12.7.1.1 User-Specific Logon for WBM
To ensure that authorized users have access to the HiPath 3000/5000 and to prevent unautho-
rized access, users must be identified by a user name and authorized by a password. This ap-
plies to all local and remote administration and maintenance procedures using Web-Based
Management (WBM).
The user group determines which data is administered. The following two user groups are per-
manently defined for administration via WBM:
● Customer
● Administrator
Each user group is assigned a fixed user name and password. You need a valid user name
and password to access a user group. Only the data authorized for the relevant user group can
be read and administrated.
The following table provides a breakdown of the two user groups and their rights for each of
the setup wizards.
Table 12-9 WBM User Groups with Associated Rights
Wizard Customer Administrator
Initial Installation
(for basic system setup)
X
New Components:
(for configuring new components)
● LAN telephones (for configuring additional IP work-
points)
X
● WLAN telephones (for configuring additional WLAN
workpoints)
X
● Analog telephones (for configuring additional analog
workpoints - group 3 fax devices, for example)
X
● Not for U.S.: S0 interfaces (for configuring additional
ISDN connections and ISDN workpoints)
X
● Licensing (for licensing system expansions) X
Change Feature:
(for modifying current system setup data)
To Next Page
Loading...
