HiPath 3000/5000 in the LAN Network Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
13-58 HiPath 3000/5000 V9, Service documentation
h3h5_in_the_lan.fm
IP Trunking
Outside IP networking, HiPath 3000/5000 provide an option for conventional networking over
CorNet-N and QSig (ECMA V1.0 and ECMA V2.0).
Additional system servic-
es (continued)
● Transit traffic
● Least cost routing (LCR)
● Call pickup (call pickup with subscribers from other nodes
(systems))
● Follow Me
● Chain call forwarding (maximum number of stations monitored
over several nodes)
● Enable and disable features in IP-networked communications
platforms with user prompts at optiPoint 500 workpoints (night
answer, for example).
● Central attendant console (optiClient Attendant) with busy sig-
nal (the states free, internal/external busy and faulty are sig-
naled for stations in IP-networked communications platforms.)
● Central attendant console functions (forward, assign, recall,
hold)
Use of only one B chan-
nel over CorNet N subset
The following features cannot be used over a dedicated line if a B
channel has already been seized:
● Consultation hold
● Transfer
● Toggle
● Conference
Path optimization in net-
worked HiPath 3000/
5000 systems
Path optimization, in other words transit traffic with identical source
and destination systems (switched or forwarded traffic, for in-
stance), is performed in HiPath 3000/5000 systems networked
over IP. This means that channels are no longer blocked.
Table 13-5 Network-wide features with IP networking
Function Name Description of the Function
To Next Page
Loading...
