Boards for HiPath 3000 Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
3-36 HiPath 3000/5000 V9, Service documentation
boards.fm
Central Board
Switches and indicators
● Reset/reload switch:
– Switch pressed < 5 s = Reset activated
– Switch pressed > 5 s = Reload activated (Fail LED (red) goes out to indicate that a
reload is in progress).
● Two LEDs indicating the board status:
– Run (green) = signals the current status of the CBSAP board (see Table 12-2)
– Fail (red) = error encountered
● Two LEDs for displaying the LAN interface status:
–LED1:
– Green = 100 Mbps online (link)
– Yellow = 10 Mbps online (link)
– Flashing = active
– LED2 (green):
– On = full-duplex (FDX)
– Off = half-duplex
To Next Page
Loading...
