Boards for HiPath 3000 Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
3-296 HiPath 3000/5000 V9, Service documentation
boards.fm
Peripheral boards
Switches S4-5 to S4-8
100 ohms On Off
75 ohms Off On
No function On On
Impedance on the S
2M
Side Switches
S4-3 S4-4
120 ohms (default) Off Off
100 ohms On Off
75 ohms Off On
No function On On
Switches Function
S4-5 Reserved
S4-6 Flash memory: only for laboratory purposes (the flash memory
is erased when switch is set to “On”).
S4-7 Reserved
S4-8 Battery: Select the “On” switch position to make the connection
to the processor’s real-time clock only after the protocol con-
verter has been configured.
To Next Page
Loading...
