inst_h3.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
4-93
Nur für den internen Gebrauch Installing HiPath 3000
Installing HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300
Mounting the housing cover
To close the system housing again, put the cover on and fasten it with the two screwed plugs.
To avoid injuries, grasp the housing cover by its outside walls only when mounting it.
2. Remove the housing cover.
Warning
Grasp the housing cover by its outside walls only.
The shielding plate on the inside of the cover may have sharp edges which can
cause cuts.
Step Activity
To Next Page
Loading...
