sysdat.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
2-23
Nur für den internen Gebrauch System Data
HiPath 3000
DIUN2 60 60 3 x x Basic rate interface (BRI) board; can also be used for
tie trunk traffic.
In HiPath 3000/HiPath 5000 V5.0 and later, the B
channels in the DIUN2 board must be licensed.
DIU2U 48 48 4 - x Board for T1-PRI trunk connection (PRI: Primary Rate
Interface)
DIUT2 60/
48
60/
48
3/4
2
x x Boards for S
2M
trunk connection, T1-PRI (Primary
Rate Interface) trunk connection (only for USA) and T1
analog trunk connection (only for USA).
The B channels associated with the DIUT2 board re-
quire a license.
STMD3 8 16 x - ISDN basic rate interface (BRI) board for configuring
ISDN trunks, tie trunks, and subscribers on the same
board.
There are two versions of this board:
● S
0
interfaces without power supply
● S
0
interfaces with power supply
TMANI8 8 x x Analog trunk board that supports the CLIP function.
TMDID 8 - x Analog trunk board for direct inward dialing
TMDID2 8 x
3
- Analog trunk board for direct inward dialing
Table 2-7 Trunk Boards for HiPath 3800
Board
Name
Capacity Coun-
try
Type/Description
Ports per board
B channels per board
Boards per cabinet
Max. number of
boards per system
ROW
USA
To Next Page
Loading...
