Workpoint Clients Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
10-118 HiPath 3000/5000 V9, Service documentation
wclient.fm
optiPoint WL2 professional/optiPoint WL2 professional S
The optiPoint WL2 professional can be used with HiPath 3000/5000 V5.0 or later.
The optiPoint WL2 professional S is the solution for SIP systems and can be used with HiPath
3000/5000 V6.0 or later.
● Interfaces: WLAN, USB
● Standards: WLAN, 802.11b (11 Mbps), 802.11g (full support of 54 Mbps), CorNet-IP, SIP
Configuration
● Wireless connection with a WLAN access point as the link to a LAN switch
● IP connection to the HG 1500 gateway in the HiPath 3000 system; CorNet-IP registration
● Basic configuration via DHCP
● Enhanced configuration via the telephone website (single telephone or using the HiPath
Deployment Service
Features
Telephone
● Telephone with color graphic display
(6 lines, 128 x128 pixel resolution, 4096 colors, 3.1cm x 3.1cm)
● Call animation and caller display (CLIP)/caller ID for incoming calls
● Illuminated keypad
● Two softkeys for dynamic access to features
● Intuitive user prompting
● Illuminated MWI key
● Speakerphone key
● Status display shows the following in standby or idle modes: date, time, battery level, RF
signal strength, connected access point
● Status display shows the following during a call: battery level, RF signal strength, call du-
ration, handset lifted, CLIP/caller ID
● Display for missed calls
● Loudspeaker function
● Displays all received calls
● Dialing via number input, SIP-URI (professional S) and IP address (direct IP call)
● Multi-line functionality
● Configurable speed-dial keys
To Next Page
Loading...
