Siemens SIROTEC Function Manual

Basic functions
7.1 Switching over units
Drive functions
314 Function Manual, 11/2017, 6SL3097-4AB00-0BP5
Parameterization with STARTER
The function for unit system switchover in STARTER can be found via the menu path "Drive
object" > "Configuration" > "Units".
The reference parameters can be found via the menu path "Drive object" > "Configuration" >
"Reference parameters".
Overview of the important parameters (see SINAMICS S120/S150 List Manual)
•
p0010
Infeed, commissioning parameter filter
•
p0100
IEC/NEMA motor standard
•
p0349
Unit system, motor equivalent circuit diagram data
•
p0505
Unit system selection
•
p0595
Techn
ological unit selection
•
p0596
Technological unit reference variable
•
p2000
Reference speed reference frequency
•
p2001
Reference voltage
•
p2002
Reference current
•
p2003
Reference torque
•
r2004
Reference power
•
p2005
Reference angle
•
p2006
Reference tempera
ture
•
p2007
Reference acceleration

Siemens SIROTEC Specifications

General

Brand	Siemens
Model	SIROTEC
Category	DC Drives
Language	English