Communication
11.2 Communication via PROFIBUS DP
Drive functions
774 Function Manual, 11/2017, 6SL3097-4AB00-0BP5
Communication via PROFIBUS DP
11.2.1
General information about PROFIBUS
11.2.1.1
General information about PROFIBUS for SINAMICS
PROFIBUS is an open international fieldbus standard for a wide range of production and
process automation applications.
The following standards ensure open, multi-vendor systems:
● International standard EN 50170
● International standard IEC 61158
PROFIBUS is tuned for high-speed, time-critical data communication at field level.
Note
PROFIBUS for drive technology is standardized and descr
ibed in the following document:
PROFIdrive Profile Drive Technology
PROFIBUS User Organization e. V.
-und-Neu-Strasse 7, D-76131 Karlsruhe
http://www.profibus.com)
Note
Before synchronizing to t
he isochronous PROFIBUS, all of the drive object pulses must be
- also for those drives that are not controlled via PROFIBUS.
PROFIBUS interface: The cyclic PZD channel is deactivated when the CBE20
is plugged in!
Destruction of the CU320-2 or other CAN bus nodes by connecting a CAN cable
Connecting a CAN cable to interface X126 of the CU320-2 can destroy the CU320-2 or
other CAN bus nodes.
• Do not connect any CAN cable to the X126 interface.
To Next Page
Loading...
Need help?
General