Siemens SIROTEC Function Manual

Extended setpoint channel
3.2 Motorized potentiometer
Drive functions
Function Manual, 11/2017, 6SL3097-4AB00-0BP5
65
Parameterization with STARTER
In the STARTER commissioning tool, the "Motorized potentiometer" parameter screen in the
project navigator under the relevant drive is activated by double-clicking "Setpoint channel" >
"Motorized potentiometer".
Function diagrams (see SINAMICS S120/S150 List Manual)
•
3001
Setpoint channel overview
•
2501
Internal control/status words
- Control word, sequence control
•
3020
Setpoint channel
- Motorized potentiometer
Overview of important parameters (see SINAMICS S120/S150 List Manual)
•
p1030[0...n]
Motorized potentiometer configuration
•
p1035[0...n]
BI: Motorized potentiometer, setpoint, raise
•
p1036[0...n]
BI: Motorized potentiometer, setpoint, lower
•
p1037[0...n]
Motorized potentiometer, maximum speed
•
p1038[0...n]
Motorized potentiometer, minim
um speed
•
p1039[0...n]
BI: Motorized potentiometer, inversion
•
p1040[0...n]
Motorized potentiometer start value
•
p1041[0...n]
BI: Motorized potentiometer, manual/automatic
•
p1042[0...n]
CI: Motorized potentiometer, automatic setpoint
•
p1043[0...n]
BI: Moto
rized potentiometer, accept setting value
•
p1044[0...n]
CI: Motorized potentiometer, setting value
•
r1045
CO: Motorized potentiometer, speed setpoint in front of the
ramp
-function generator
•
p1047[0...n]
Motorized potentiometer, ramp
-up time
•
p1048[0...n]
Motorized potentiometer, ramp
-down time
•
r1050
CO: Motorized potentiometer, setpoint after the ramp
-function
generator
•
p1082[0...n]
Maximum speed

Siemens SIROTEC Specifications

General

Brand	Siemens
Model	SIROTEC
Category	DC Drives
Language	English