Communication
11.3 Communication via PROFINET IO
Drive functions
850 Function Manual, 11/2017, 6SL3097-4AB00-0BP5
PROFIenergy query commands
Determines all supported energy-saving modes.
Get_Mode Determines the energy-saving mode.
Determines the current PROFIenergy status.
PEM_Status_with_CTTO Determines the actual PROFIenergy status, the same as for
the command "PEM status" and in addition with the regular
transition time to the operating state.
Determines the supported PROFIenergy commands.
Shows the implemented PROFIenergy profile.
Get_Measurement_List Returns the measured value IDs that can be accessed using
the "Get_Measurement_Values" command.
Get_Measurement_List_with_object
_number
Returns the measured value IDs and the associated object
number that can be accessed using the
"Get_Measurement_Values_with_object_number" command.
Get_Measurement_Values Returns the requested measured value using the measured
value ID:
• For power measured values:
The command addresses the sum of the measured value
over all control drive objects.
• For energy measured values:
The command returns the sum of the measured value over
all control drive objects.
• For power factors:
This measured value is supported only for a SINAMICS
with a control drive object.
Get_Measurement_Values_with_obj
ect_number
Returns the requested measured values using the measured
value ID and the object number. The object number corre-
sponds to the drive object ID.
The drive object ID of the Control Unit is used to address the
measured values as with "Get_Measurement_Value".
To Next Page
Loading...
Need help?
General