Basic information about the drive system
13.3 Licensing
Drive functions
940 Function Manual, 11/2017, 6SL3097-4AB00-0BP5
Note
The drive can only be operated with an insufficient license for an option during
commissioning and servicing. For this purpose, the Trial License Mode must be activated
explicitly.
The drive requires a sufficie
nt license in order for it to operate. Not all options support the
System response for an insufficient license for a function module
An insufficient license for a function module is indicated using the following fault and LED on
the Control Unit:
● F13000 licensing is insufficient.
● F13010 licensing, function module not licensed.
● The drive is stopped with an OFF1 response.
● LED READY Red light flashing at 2 Hz
Note
It is not possible to operate a drive system with an insufficient license for a fu
nction module.
The drive requires a sufficient license in order for it to operate.
System response if there is a not a sufficient license for an technology extension
An insufficient license for a technology extension (also known under the name "OA
application") is indicated by the following error and LED on the Control Unit:
● F13000 licensing is insufficient.
● LED READY Red light flashing at 2 Hz
Note
The drive can only be operated with an insufficient license for a technology extension during
commissioning and
servicing. For this purpose, the Trial License Mode must be activated
The drive requires a sufficient license in order for it to operate. Not all technology extensions
support the Trial License Mode.
To Next Page
Loading...
Need help?
General