Basic information about the drive system
13.3 Licensing
Drive functions
944 Function Manual, 11/2017, 6SL3097-4AB00-0BP5
The Trial License Mode can be used for maximum of 3 Trial License Periods.
1. Call the license overview page on:
– Startdrive:
Select the drive in the project navigator. Select the subentry "License overview" in the
project navigator.
– STARTER:
Select the drive in the project navigator. Select the subentry "License overview" in the
project navigator.
– Web server S120:
Call "Licenses" in the navigation.
2. Click the "Activate trial license mode" button.
Figure 13-6 Activate trial license
3. To activate this mode, in the query dialog click on "Activate".
Alarm A13030 indicates that Trial License Mode is activated. The status overview then
shows the remaining operating time of the licensed options in Trial License Mode.
Figure 13-7 Example of web server: Displaying overview of licenses with active periods
After the Trial License Period has expired, alarm A13031 "Trial license period expired" is
output.