Sirona Intego - Flushing the Cuspidor; Flushing the Cuspidor on the Easypad

64 57 498 D3543
D3543.201.01.05.02 08.2016
151
Sirona Dental Systems GmbH 4Operation
Operating Instructions INTEGO 4.7Water unit
båÖäáëÜ
4.7.3 Flushing the cuspidor
The flushing function can be used for rough cleaning of the cuspidor
during treatment.
The cuspidor is always flushed using the public drinking water supply. It
is not taken from the fresh water bottle or the tank for stand-alone water
supply.
4.7.3.1
Flushing the cuspidor on the EasyPad
Switching flushing on/off
➢ Press the Flushing fixed key.
 The flushing function is activated for the preset flushing time.
Coupling flushing to mouth rinsing position S and setting flushing time
1. Press and hold the Flushing key on the dentist element (> 2 s).
 The operating context
Flushing is displayed. The setting focus
Link flushing to mouth rinsing position flashes.
2. Press on the left or right arrow of the favorite key pad.
 The display switches between "S.0" and "S.1". If S.1 is selected,
the flushing function will automatically be switched on for the
duration of the preset flushing time when the chair is moved to
mouth rinsing position S.
3. Confirm your selection with the favorite key
2 / Setup .
 The setting focus
Flushing time flashes.
4. Set the filling time in seconds. Press the left or right arrow on the
favorite key pad to prolong or shorten the flushing time.
5. Confirm your setting with the
2 / Setup favorite key.
 The time is displayed.
1
2
Setup
3
2
Setup
1
2
Setup
3
2
Setup