Sirona Intego - Foot control

64 57 498 D3543
66 D3543.201.01.05.02 08.2016
4Operation Sirona Dental Systems GmbH
4.3Foot control Operating Instructions INTEGO
4.3
Foot control
The treatment center can be operated with a pneumatic foot switch or the
C
+
electronic foot switch.
4.3.1 Pneumatic foot switch
When the instrument is removed from the holder, the speed or intensity
are automatically displayed on the EasyPad. On the EasyTouch, the
instrument dialog is called up.
Foot pedal
➢ Remove an instrument (electric motor, highspeed handpiece/air
motor, SIROSONIC L) and step on the foot pedal.
 The instrument is switched on with the set speed and intensity.
For highspeed handpieces/air motors, the speed is controlled by
the pedal action.
Spray switch
➢ Move the toggle switch.
 Left position: Spray off
Right position: Spray on
The spray is either switched on or off when an instrument is
activated.
Chip blower
With the chip blower, an air jet comes out of the burr instrument.
➢ Remove an instrument and press on the right button.
 The chip blower remains switched on as long as the button is
pressed.