Sirona Intego - Disinfect User Interfaces

64 57 498 D3543
D3543.201.01.05.02 08.2016
209
Sirona Dental Systems GmbH 5Care, cleaning and maintenance by the practice team
Operating Instructions INTEGO 5.2Surfaces
båÖäáëÜ
5.2.2 Disinfect user interfaces
The user interfaces on the dentist and assistant element and the
touchscreen of the EasyTouch can be switched off for disinfecting. This
prevents the inadvertent triggering of unwanted functions.
Care, cleaning, and disinfecting agents
Switching functions on the EasyPad user interface off
On the EasyPad, this function also protects the treatment center and the
SIVISION monitor from disturbances from HF fields.
✔ The electric motors are placed in the holder.
1. Actuate the
Display mode/clean fixed key on the dentist element.
 The message "C.L.E.A.N" appears on the EasyPad display. The
treatment center is blocked for data input. The instruments of the
dentist and assistant elements can no longer be activated. The
SIVISION monitor and the camera system are switched off.
2. Disinfect the user interfaces by wiping them.
3. Press and hold the
Display mode/clean fixed key on the dentist
element (> 3 s).
 The user interfaces are now reactivated.
Switching functions on the EasyTouch user interface off
1. Actuate the Clean fixed key on the dentist element.
 A display on the touchscreen shows that it and fixed keys on the
dentist and assistant element are deactivated.
2. Disinfect the user interfaces by wiping them.
3. Press and hold the
Clean fixed key on the dentist element (> 3 s).
 The touchscreen and user interfaces are now reactivated.
NOTICE
Approved care, cleaning, and disinfecting agents
Use only care, cleaning and disinfecting agents approved by Sirona, see
"Care, cleaning, and disinfecting agents" [ → 205].
Clean
Clean
A
10:45:03
2
1
0S
Clean
3 sec