Sirona Intego - Page 201

64 57 498 D3543
D3543.201.01.05.02 08.2016
201
Sirona Dental Systems GmbH 4Operation
Operating Instructions INTEGO 4.14Configuration of the treatment center (setup)
båÖäáëÜ
4.14.2.3.8 Adjusting the cleaning agent mixture for chemical suction hose
cleaning
The chemical suction hose cleaning option is only available for the
INTEGO pro.
The suction system can be automatically cleaned by pumping water into
a tank behind the receptacle of the suction hoses and extracting it from
there. A cleaning agent is added to the water if the dental treatment center
is equipped with the chemical suction hose cleaning option. For more
information, see the section "Suction hose cleaning on the Compact
water unit" [ → 237].
It is possible to set how much cleaning agent should be added to the
water for chemical suction hose cleaning. The quantity is dependent on
the cleaning agent used and the type of treatment. Please follow the
manufacturer’s instructions for the cleaning agent.
➢ Use the – and + keys to adjust the cleaning agent mixture for
chemical suction hose cleaning (0 to 5%).
 The adjusted percentage is displayed on the touchscreen.
➢ Change to the next setup program page.
4.14.2.3.9 Switching the water heater on/off
The optional heater for the treatment water can be switched on/off.
➢ Touch the Tumbler heater key.
 The selected field is highlighted orange.
3 %
chem