Sirona Intego - Page 204

64 57 498 D3543
204 D3543.201.01.05.02 08.2016
5Care, cleaning and maintenance by the practice team Sirona Dental Systems GmbH
5.1Basics Operating Instructions INTEGO
Clean the gold trap [ → 248]
Cleaning the suction hoses [ → 235]
Sterilize/disinfect the suction handpieces [ → 245]
Purge the water lines (purge function) [ → 214] or Manually purge the
water lines [ → 228]
Daily
Automatically purge the water lines (AutoPurge function) [ → 220], Purge
the water lines (purge function) [ → 214]or Manually purge the water lines
[ → 228]
Rinse water lines [ → 214]
Empty the central suction sieve [ → 246]
Cleaning the suction system using the cleaning adapter in the cuspidor or
via external container [ → 242] (if the suction hose cleaning option or
chemical suction hose cleaning option are not available)
Clean the suction hoses [ → 247]
Disinfect dentist and assistant element [ → 210]
Sterilize silicone mats and handle covers [ → 210]
Weekly
Clean and care for upholstery [ → 212]
Cleaning the bottom surface of the mount for the backrest component.
[ → 212]
Clean outlet lines [ → 250] (if chemical suction hose cleaning option
available)
Change the cotton wool roll on the turbine hose and oil collector [ → 233]
Clean the foot control [ → 213]
Monthly or as required
Change the water and air filters [ → 253]
Conduct a microbiological water test [ → 205]
Sanitize the treatment center [ → 268]
Change the amalgam rotor [ → 255] or
empty the sediment container [ → 260] or
clean the filter insert of the standard wet suction [ → 263] or
empty the receiving tank of the air jet pump [ → 266]
Check the message system of the amalgam separator [ → 258]
For a quick overview of the work involved, see the “Maintenance,
cleaning, and disinfection schedule” for the INTEGO / INTEGO pro
treatment center.