To Next Page

To Previous Page

Section 07 ELECTRICAL SYSTEM

Subsection 02 (SPARK PLUGS)

SPARK PLUGS

DISASSEMBLY

First unscrew the spark plug 1 turn.

Clean the spark plug and cylinder head with pres-

surized air, then completely unscrew.



WARNING

Whenever using compressed air, always

wear protective eye wear.

SPARK PLUG INSTALLATION

Prior to installation make sure that contact sur-

faces of the cylinder head and spark plug are free

of grime.

CAUTION: Do not adjust electrode gap of spark

plug BR9ECS.

1) Apply anti-seize lubricant (P/N 293 800 070)

over the spark plug threads to prevent possi-

ble seizure.

2) Hand screw spark plug into cylinder head and

tighten with a torque wrench and a proper

socket.

A00E0BA

TYPICAL

1. Proper socket

2. Improper socket

SPARK PLUG TIGHTENING

TORQUE

MODEL

SPARK

PLUGS

TORQUE

N•m(lbf•ft)

All models

NGK

27 (20)

mmr2004-Rev 257

Ski-Doo REV Series Shop Manual

Other manuals for Ski-Doo REV Series