Ski-Doo REV Series Shop Manual

Section 01 TOOLS AND SERVICE PRODUCTS
Subsection 01 (SERVICE TOOLS)
SUSPENSION — RECOMMENDED TOOLS
a) Track cleat remover
(P/N 529 008 200)
Pins
(P/N 529 008 204)
NOTE: Pins can be rotated 180°
depending on wheter the tool
is used by a left-hander or righ-
hander.
b) Track cleat remover
(P/N 529 028 700)
APPLICATION
a) 1993 and older.
b) All models except Tundra.
Camber angle tool
(P/N 529 021 600)
NOTE: Angle finder with a mag-
netic base must be used.
Suggestion: K_D tool no. 2968
APPLICATION
All DSA front suspensions.
Track tension gauge
(P/N 529 021 500)
APPLICATION
All models.
Track cleat installer
a. (P/N 529 028 800) narrow
APPLICATION
a. 1994 and newer.
Dome guide
a. (P/N 529 026 500)
b. (P/N 529 035 728)
APPLICATION
a. C-36 T/A shocks.
b. C-46 T/A shocks.
N–>
Floating piston puller
(P/N 529 035 901)
APPLICATION
T/A shock with external gas
reservoir.
16 mmr2004-Rev

Ski-Doo REV Series Specifications

General

Chassis	REV
Track Width	15 in
Fuel Capacity	10.6 gal
Seating Capacity	1
Reverse	Available on most models
Electric Start	Available on most models