Ski-Doo REV Series Shop Manual

Section 01 TOOLS AND SERVICE PRODUCTS
Subsection 01 (SERVICE TOOLS)
Shock wrench
(P/N 529 035 727)
APPLICATION
All T/A shocks.
HPG shock holding tool
(P/N 529 035 769)
APPLICATION
All HPG shocks.
Piston guide
a. (P/N 529 026 600)
b. (P/N 529 035 608)
APPLICATION
a. C-36 T/A shocks.
b. C-46 T/A shocks.
Gas shock valve tool (tire valve
type)
(P/N 529 035 570)
APPLICATION
Some 2000 and up T/A shocks.
Gas fill tool kit (needle type)
(P/N 503 190 102)
APPLICATION
2003 and up T/A shocks.
Drill bit
(P/N 529 031 800)
APPLICATION
All3/16inchrivets.
Spring installer (bar)
(P/N 529 005 000)
APPLICATION
Tundra and all SC-10 suspen-
sions.
Drive axle holder
(P/N 529 007 200)
APPLICATION
All models.
Ball joint extractor
(P/N 529 035 827)
APPLICATION
REV series.
mmr2004-Rev 17

Ski-Doo REV Series Specifications

General

Chassis	REV
Track Width	15 in
Fuel Capacity	10.6 gal
Seating Capacity	1
Reverse	Available on most models
Electric Start	Available on most models