Ski-Doo REV Series Shop Manual

Section 01 TOOLS AND SERVICE PRODUCTS
Subsection 01 (SERVICE TOOLS)
Adjustment wrench
(P/N 529 035 891)
APPLICATION
REV series.
Fuel pump nut wrench
(P/N 529 035 899)
APPLICATION
2-TEC and 1004 engine
equipped models.
Pressure gauge
(P/N 529 035 591)
1) Clip
(P/N 529 021 800)
1
APPLICATION
2–TEC, 1004 and 1503 engine
equipped models.
Fuel line remover
(P/N 529 035 714)
APPLICATION
2-TEC, 1004 and 1503 engine
equipped models.
Oil pressure gauge
(P/N 529 035 709)
APPLICATION
1004 and 1503 engine equipped
models.
Oil pressure adaptor
(P/N 529 035 652)
APPLICATION
1004 and 1503 engine equipped
models.
Heated grips insertion tool
a. (P/N 529 035 897)
b. (P/N 529 035 936)
APPLICATION
a. ZX liquid cooled models with
straight grips.
b. Models with j-hook type
grips.
Crimp pliers
(P/N 529 035 730)
APPLICATION
All models with a battery.
N–>
Insert pliers
(P/N 295 000 162)
APPLICATION
6 mm insert equipped models.
20 mmr2004-Rev

Ski-Doo REV Series Specifications

General

Chassis	REV
Track Width	15 in
Fuel Capacity	10.6 gal
Seating Capacity	1
Reverse	Available on most models
Electric Start	Available on most models