Section 03 TROUBLESHOOTING
Subsection 03 (TRANSMISSION AND BRAKE SYSTEM)
SYMPTOM BELT TOO NARROW ON ONE SECTION.
CONDITION NORMAL USE
TEST/INSPECTION 1. Check for frozen track.
a. Frozen track.
Free track from ice.
2. Check parking brake.
a. Parking brake is engaged.
Release parking brake.
3. Check track tension/alignment.
a. Track too tight.
Adjust track tension and alignment.
4. Check drive pulley.
a. Drive pulley does not operate properly.
Repair or replace drive pulley.
5. Check idle speed.
a. Engine idle speed is too high.
Adjust according to specifications.
6. Check drive belt length.
a. Incorrect belt length.
Replacewithanappropriatedrivebelt(refertoTECHNICALDATA).
7. Check distance between pulleys.
a. Incorrect pulley distance.
Readjust according to specifications.
8. Check belt height.
a. Belt height is incorrect.
Adjust according to specifications.
SYMPTOM BELT SIDES WORN CONCAVE.
CONDITION NORMAL USE
1. Check pulley half surfaces.
a. Rough or scratched pulley half surfaces.
Repair or replace.
TEST/INSPECTION
2. Check drive belt identification number.
a. Wrong belt.
Replacewithanappropriatedrivebelt(refertoTECHNICALDATA).
58 mmr2004-Rev