General Information Windows (Applicable Features / Operations)
14
After bootup if Wi-Fi is not automatically connected the Wi-Fi icon in the System Tray
(lower right side) (Figure 1-4), or on the Diagnostic Suite lower toolbar (Figure 1-5)
indicates Wi-Fi is not connected.
Figure 1-4
Figure 1-5
2. To connect to a network, click the Wi-Fi icon in the System Tray or on the
Diagnostic Suite lower toolbar.
The wireless network connection window opens (shown below).
Figure 1-6
3. Choose your Wireless Network from the list of available networks, then select
Connect.
A password is required when choosing a protected network.
A wireless network connection progress window displays as the connection is being
made.
4. After the connection is successfully made, the Wi-Fi icon will display as
Connected (shown below).
The diagnostic tool is now connected to the Wi-Fi network.
ConnectedNot Connected Connected /
Not Connected to Internet
My wireless connection 1
My wireless connection 2
My wireless connection 3
My wireless connection 4
My wireless connection 5
My wireless connection 6
My wireless connection 7
To Next Page
Loading...
