Sony XVS Series

216
1 In the Flex Shadow menu (4115), press [Combine
Shadow], turning it on.
2 Set the following parameter.
• The Combine Shadow effect is applied to all shadows,
not only the sections where shadows overlap.
• Enabling the Combiner global effect when flex shadow
is enabled will enable the Combine Shadow effect. In
this state, Combine Shadow remains enabled even if the
global effect is disabled.
• In Combine Shadow, the setting for the channel with the
lowest number among the channels being combined is
enabled.
Flex shadow creation example
This section describes the flex pattern creation flow for the
following pattern as an example.
No combine shadow is set.
Video Video
Shadow Shadow
Combine shadow is enabled.
Density is set to 100.00.
Combine shadow is enabled.
Density is set to 0.00.
Example 1: When Flex Shadow is enabled on both of
two channels.
No. Parameter Adjustment
1 Density Density of combine shadow
Notes
No combine shadow is set.
Video Video
Shadow
Combine shadow is enabled.
Density is set to 100.00.
Combine shadow is enabled.
Density is set to 0.00.
Example 2: Flex Shadow is enabled on one channel only.