467
Cue Device? 1 to 12, FrameMemory1Clip to
FrameMemory20Clip
Target device
Timecode? Current (a),
hh:mm:ss:ff
Start point timecode
hh=hours (00 to 23)
For FrameMemory1Clip to
FrameMemory20Clip, “hh” is fixed to “01.”
mm=minutes (00 to 59)
ss=seconds (00 to 59)
ff=frames (00 to 29)
(a): Mode in which the currently set timecode is
used
Stop Device? 1 to 12, FrameMemory1Clip to
FrameMemory20Clip
Target device
FF Device? 1 to 12, FrameMemory1Clip to
FrameMemory20Clip
Target device
Rewind Device? 1 to 12, FrameMemory1Clip to
FrameMemory20Clip
Target device
DiskFileLoad Device? 1 to 12 Target device
FileName? File Name Name of file being set (max. 23 characters)
Snapshot Region? ME1 to ME5, PP, User1 to
User8, DME1 to DME4,
Router
Target region
Register? 1 to 99 Target register number
Attribute? Off, Dissolve, AutoTransition,
Dissolve&AutoTransition
Target snapshot attribute
Time? Current (a), 0 to 999 Duration of effect dissolve (number of frames)
(a): Mode in which the currently set value is
used
KeySnapshot ME? ME1 to ME5, PP Target control block
Key? Key1 to Key8 Target key
Register? 1 to 4 Target register number
WipeSnapshot ME? ME1 to ME5, PP Target control block
Register? 1 to 10 Target register number
DMEWipeSnapshot ME? ME1 to ME5, PP Target control block
Register? 1 to 10 Target register number
TimelineRecall Region? ME1 to ME5, PP, User1 to
User8, DME1 to DME4, PBus,
Device1 to Device12, GPI
Target region
Register? 1 to 399 Target register number
TimelineRun Region? ME1 to ME5, PP, User1 to
User8, DME1 to DME4, PBus,
Device1 to Device12, GPI,
Current (a)
Target region
(a): Mode in which operation takes place in the
region currently specified in the numeric keypad
control block
TimelineRewind Region? ME1 to ME5, PP, User1 to
User8, DME1 to DME4, PBus,
Device1 to Device12, GPI,
Current (a)
Target region
(a): Mode in which operation takes place in the
region currently specified in the numeric keypad
control block
TimelineFF Region? ME1 to ME5, PP, User1 to
User8, DME1 to DME4, PBus,
Device1 to Device12, GPI,
Current (a)
Target region
(a): Mode in which operation takes place in the
region currently specified in the numeric keypad
control block
Shotbox Register? 1 to 99 Target register number
Pause Time? 0 to 999 Time for which macro is paused (number of
frames)
Symbol Parameter name Arguments Description
To Next Page
Loading...
