149
Interchangeable Parts
Not all parts are interchangeable between MRi and non-MRi
units specifi cally manometer and top molding assembly)
All the ‘bolt on’ and accessory parts of the CAS absorbers are mechanically
interchangeable among the different models with most differences being color
only.
• NRV discs and domes (including O-rings)
• Soda lime inner and outer canisters
• Manometer (but not between MRi and non-MRi models)
• APL valve (new & original type are interchangeable)
• All other external seals and O-rings (not including internal central seal,
etc.)
For 122005** and 122006** series models, besides the color differences, most
main body parts, are interchangeable including bottom moldings, central body
plate, central seal etc. The top molding assembly and manometer are not
interchangeable between MRi and non-MRi units.
Non-Interchangeable parts
The 122009** models do not share any main body (top/bottom moldings, central
body plate, central seal etc.) Interchangeable parts with the 122005** and
122006** models. Also for the 122009** models, the top molding assembly
and manometer are not interchangeable between MRi and non-MRi units.
Detailed Repair Procedures
To Next Page
Loading...